Dayton Audio's 10" RSS265HO-44 DVC High Output Reference Series Subwoofer is purpose-built for moving lots of air, extreme power handling, extremely low distortion... and it does it all with an extremely small enclosure requirement! The minimum airspace optimization of this driver makes it perfect for car audio automotive applications and limited space home audio applications.
To minimize distortion, three copper short-circuit paths are built into the motor. This reduces second, third, and intermodulation distortion to levels only attained previously by expensive, exotic subwoofers. A side benefit is reduced energy storage and inductance, making the RSS265-HO-44 a very musical subwoofer. In fact, frequency response remains very flat up to 500 Hz.
Additional features include: a heavy gauge black anodized aluminum cone that resists deformation from extreme air pressure levels found inside of small sealed enclosures, a fully ventilated motor for reduced power compression, a rigid cast aluminum frame for structural integrity, and a tough rubber surround that won't wear down over years of use. Dual 4-ohm voice coils allow for a wide array of wiring options.About the Subwoofer Starter Kit
Consisting of just baffles and bracing, the 10" Subwoofer Starter Kit is the easiest and most cost effective way to build a custom 1.0 cubic foot subwoofer enclosure for novice woodworkers. Accurately cutting a hole and recess for a driver requires a high level of precision and specialized tools which can be difficult for anyone new to woodworking or who does not have space for a full woodshop. Therefore, with a precut double layer 1-1/2" thick front baffle with driver recess and round overs, along with an extensive bracing design, all of the difficult work has been done for you. You just need to cut the remaining the remaining pieces, including 4 13" x 13" pieces of 3/4" MDF for the top bottom and sides, and 1 14.5" x 13" piece 3/4" MDF for the back. If using a table saw you only need to move the fence once to complete the entire enclosure.
During the CNC manufacturing process, rabbets dadoes are cut into the front panel for precise panel alignment. A unique two-piece brace adds superior rigidity without affecting the subwoofer's performance. The result is a resonance-free, sealed subwoofer cabinet. When your friends ask about it, you get the pleasure of saying, "I built it myself!"
Overall Volume: 1.0 cubic feet
Dayton Audio RSS265HO-44 DVC 10" Subwoofer Specifications:
• Power handling: 600 watts RMS/1,200 watts max
• Impedance: 4+4 ohms • Frequency response: 25-600 Hz
• SPL: 90.5 dB 2.83V/1m
• Fs: 27.6 Hz
• Vas: 1.23 ft³
• Qts: 0.45
• Xmax: 13.25 mm.
10" Subwoofer Starter Kit Specifications:
• Panel thickness: 3/4", front baffle is 1-1/2"
• Panel material: Medium Density Fiberboard (MDF)
• Finished net cabinet volume (subtracting the double thick baffle and bracing): 1.0 cubic feet
• External dimensions: 14-1/2" H x 13" W x 15" D
• Mounting depth (mounting baffle to brace): 7-7/8"
• Subwoofer recess: 3/8" deep
• Weight: 9.6 lbs.
• Made in the U.S.A.
Payment & Security
Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.